Showing all 3 results
The extensive range of Hetman Musical Instrument Lubricants constitutes an application-specific system of advanced instrument care for the discriminating musician.
This system of lubricants was developed to go beyond the limitations of conventional oils and provide a new level of instrument performance and longevity.
• Leading Edge Technology – each lubricant embodies the most advanced technology, providing superior, longer-lasting performance, and protection against wear and corrosion.
• Application-Specific – each lubricant's viscosity and formulation is designed for its specific application.
• Compatibility – each lubricant is compatible with conventional petroleum-based oils, avoiding potential gumming problems associated with some synthetics.
• Easy Application – each lubricant is packaged with a dispensing system that allows convenient application to the most difficult-to-reach lubrication points.
• Application Guide – an easy-to-follow application guide is available that clearly describes the proper use of each product.
PISTON VALVE LUBRICANTS
Hetman Synthetic Piston Lubricants provide superior wear and corrosion protection for all types of piston valves. Whether your instrument has Monel, stainless steel, or nickel-plated pistons, these long-lasting, non-gumming lubricants will provide for an action that is smooth, quick and consistent. Three nontoxic viscosity grades are available in 60 ml controlled dropper tip bottles:
SLIDE LUBRICANTS (OIL)
Hetman Synthetic Slide Oils are formulated for first and third valve slides (trumpets, cornets, etc.). These lubricants are designed to maintain an airtight seal and smooth slide action when making intonation adjustments. The proper choice of viscosity grade depends on the fit and length of your slides. Generally speaking, lighter viscosities are needed for tighter fitting and longer length slides, whereas heavier viscosities are required for looser fitting and shorter length slides. One should choose the heaviest viscosity that still allows rapid slide movement. Packaged in 22 ml bottles with special dropper tip applicator.
SLIDE LUBRICANTS (GREASE)
Hetman Slide Grease Lubricants are designed for tuning slides and valve slides that are normally maintained in position once adjusted. The choice of three unique, nontoxic products allows for smooth, air-tight performance of both tight and loose fitting slides:
ROTARY VALVE LUBRICANTS
Rotor Lubricants: Hetman Synthetic Rotor Lubricants provide for long-lasting rotary valve performance. These lubricants will protect rotors and valve casings against corrosion and wear while improving valve seal. Hetman Synthetic Rotor Lubricants will not swell rubber bumpers or damage plastic components. The 22 ml long-tipped precision needle oiler facilitates application through the slide tubes.
LINKAGE and BALL JOINT LUBRICANTS
Linkage and Ball Joint Lubricants: Hetman Synthetic Linkage and Ball Joint Lubricants are formulated for superior performance and protection of rotary valve linkage components: spherical rod end bearings (e.g. “Minibal” and “Unibal”), linkage joints, cross joints, lever hinges and ball joints. These lubricants combat wear; provide for positive, quiet actions; and prevent corrosion of linkage components. These formulations are nontoxic, and non-damaging to plastic components and rubber bumpers. Packaged in 22 ml precision needle oilers.
320 Tinakori Road, Thorndon, Wellington 6011
04 472 2668 | 021588738
Weekdays – 9am – 5pm
Saturdays – 11am – 1pm
Sundays – closed
Alto / Tenor Horn
MULTIPLE WIND and BRASS
© 2023 Vanguard Orchestral.